CoolFlow 1 Pre-Mix

Category:

Description

Industrial Grade Refrigerant Antifreeze based on Ethylene Glycol

CONTAINS CORROSION INHIBITORS TESTED IN ACCORDANCE WITH BS5117 AND FOUND TO MEET BS6580 AND ASTM D1384 CORROSION STANDARDS. ALSO CONTAINS SCALE AND BIOLOGICAL INHIBITORS.

 

20% PRE-MIXED SOLUTION WITH ULTRAPURE WATER TO ACHIEVE -10°C FREEZE PROTECTION

 

Health & Safety Instructions: COOLFLOW 1 is classed as harmful if swallowed and may cause irritation to skin and eyes. Always wear appropriate personal protective gear when handling chemicals, including goggles and rubber gloves. Please refer to the associated Safety Data Sheet

 

85-9012– 25L CoolFlow 1 Pre-Mix

Product Colour – Dark Pink

Summary – Rating: B

Suitable for industrial process cooling, where a toxic classification is not an issue.

Efficiency – Rating: B

High thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

Antifreeze – Rating: A

Provides protection down to -50°C and less volume is required to achieve the same freeze-point protection

Corrosion Control – Rating: A

Long-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation..

Toxicity – Rating: D

Classified as Harmful but usually considered as Toxic. Suitable for industrial cooling systems where toxicity is not an issue..